80gsm comes 2330mm wide, $10LM
150gms comes 1529mm wide, $15LM
Bleeder/ breather fabrics are manufactured from needled,
polyester fabric. They are used as a breather and absorption medium in vacuum
bagging applications. The breather fabric should be separated from the
composite laminate by a release material.
Within your vacuum
bagging lay-up, Breather/Bleeder drapes easily over your laminate, directly
below your bagging film. As a breather, it allows for vacuum pressure to be
applied evenly across the entire surface of the laminate. It also permits any
gases released during cure to escape.
It will absorb excess
resin applied during the lay-up process. Bleeder should be thrown away after
use.
Click here to download a datasheet for the 150gsm breather
No recommended products at the moment.
